81 found, showing page 1 of 3
$21.99
BLADE PLANER 12"****
Small bin organizer includes 8 small removable bins. Polypropylene bottom and bins. Polycarbonate clear lid. Sealed for water resistance. Aluminum side latches interlock together to allow for stacking multiple organizers.
View Details
$186.19
6.5A 3-1/4" PLANER MAKITA
Features 6.5 amp motor for fast material removal. High power-to-weight ratio - weighs only 5.7 lb (pound). Planes up to 3-1/4" wide and 3/32" deep in a single pass. Two-blade cutter head with 17,000 rpm (revolutions per minute) delivers smooth finish. Easy blade setting system for fast blade installation. Precision machined aluminum base for planing accuracy. Equipped with double edge carbide blades for added performance. Rigid die-cast aluminum housing with all ball bearing construction for longer tool life. Machined aluminum and balanced planer drum for reduced vibration and added durability. Lock-on button for continuous operation. Click depth adjustment knob with easy-to-read scale with settings from 0" to 3/32" (.01 mm increments) for precise depth adjustment. Ergonomically centered balance with rubberized front and rear handles for added comfort. Spring-loaded stand elevates the base to protect the blades and work piece. High quality poly-v belt provides added durability. Can be equipped with large, high speed steel blades (optional accessory). Double insulated. Kit includes Blade Gauge Assembly (123062-2), Wrench (782209-3), Guide Rule (165581-2), Blade Set (D-46246), Tool
View Details
$10.99
1/2" COREBOX BIT
Cuts rounded grooves used in a variety of applications ranging from doors to columns. Carbide tipped. 1/4" shank.
View Details
$16.99
3/8" RABBETING BIT
Equipped with pilot for making rabbeting cuts without use of a router guide. Carbide tipped. 1/4" shank.
View Details
$19.99
3/8" COVE ROUTER BIT
For decorative edging. Carbide tipped. 1/4" shank. 1/2" bearing.
View Details
$18.49
1/4" EDGEBEAD BIT
For decorative edging and window sash. 1/4" shank. High-speed steel. 1" shank length.
View Details
$24.99
1/2" ROUNDOVER BIT
Use to create decorative edging and drop-leaf table joints. Create beading profiles with corner round bits by exchanging the 1/2" bearing with a 3/8" bearing (included with bit). Carbide tipped. 1/4" shank.
View Details
$21.99
1/4" ROMAN OGEE BIT
For decorative edging and period furniture. 1/4" shank. 1/4" bearing.
View Details
$19.99
1/4" COVE ROUTER BIT
For decorative edging. Carbide tipped. 1/4" shank. 1/2" bearing.
View Details
$18.99
1/8" CLASSICAL BIT
Adds classic beauty to all projects with beautiful and decorative edging.
View Details
$30.99
3/16" CLASSICAL BIT
Adds classic beauty to all projects with beautiful and decorative edging.
View Details
$13.99
BIT STRAIGHT 3/16"**************
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$14.99
5/8" STRAIGHT ROUTER BIT
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$13.99
1/2" 90DEG V ROUTER BIT
Excellent for door front grooving, lettering, and sign work. Shear angle cutter geometry for smooth efficient cutting. Carbide tipped. 1/4" shank.
View Details
$43.99
1/4" COVE BIT
Carbide tipped. Designed for excellent smoothness of cut and balanced cutting. For decorative edging and period furniture. Double flute. Ball bearing guide. Cuts plywood, soft and hardwoods. Fast cutting bit for mortises. Precise hook angle for efficient cutting. Double flute. End of bit relief for fast plunge cutting.
View Details
$47.99
3/8" COVE BIT
Carbide tipped. Designed for excellent smoothness of cut and balanced cutting. For decorative edging and period furniture. Double flute. Ball bearing guide. Cuts plywood, soft and hardwoods. Fast cutting bit for mortises. Precise hook angle for efficient cutting. Double flute. End of bit relief for fast plunge cutting.
View Details
$32.99
5/8" TOP BEARNG TRIM BIT
Carbide tipped. Designed for excellent smoothness of cut and balanced cutting. Used for pattern cutting, lettering, and plunge cutting. For fast, smooth, accurate trim cuts in laminate. Cuts plywood, soft and hardwoods. Precise hook angle for efficient cutting. Double flute. Carded.
View Details
$35.99
3/4" TOP BEARNG TRIM BIT
Carbide tipped. Designed for excellent smoothness of cut and balanced cutting. Used for pattern cutting, lettering, and plunge cutting. For fast, smooth, accurate trim cuts in laminate. Cuts plywood, soft and hardwoods. Precise hook angle for efficient cutting. Double flute. Carded.
View Details
$9.99
3/16" COREBOX BIT
Cuts rounded grooves used in a variety of applications ranging from doors to columns. Carbide tipped. 1/4" shank.
View Details
$169.00
1-3/4HP ROUTER
Ball and roller bearing construction. Precision rack and pinion depth adjustment. Longer length collet system for better holding power and less run-out. 1/2" collet capacity. 8' rubber cord. 11A, 24,500 RPM. Includes 1/4" and 1/2" collet.
View Details
$13.99
1/4" STRAIGHT ROUTER BIT
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$13.99
BIT STRAIGHT 1/4"*********
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$14.99
3/8" STRAIGHT ROUTER BIT
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$14.99
1/2" STRAIGHT ROUTER BIT
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$14.99
3/4" STRAIGHT ROUTER BIT
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$13.99
1/8" STRAIGHT ROUTER BIT
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$19.99
1/4" ROUNDOVER BIT
Use to create decorative edging and drop-leaf table joints. Create beading profiles with corner round bits by exchanging the 1/2" bearing with a 3/8" bearing (included with bit). Carbide tipped. 1/4" shank.
View Details
$22.99
3/8" ROUNDOVER BIT
Use to create decorative edging and drop-leaf table joints. Create beading profiles with corner round bits by exchanging the 1/2" bearing with a 3/8" bearing (included with bit). Carbide tipped. 1/4" shank.
View Details
$11.99
1/2" DOVETAIL ROUTER BIT
For dovetail joint applications. Cutting edges are precision ground for extra smooth cuts. Carbide tipped. 1/4" shank.
View Details
$17.99
1/2" RABBETING BIT
Equipped with pilot for making rabbeting cuts without use of a router guide. Carbide tipped. 1/4" shank.
View Details
$13.99
BIT MORTISING 1/2"*****
Fast cutting bit for making mortises when work is started at the edge. Smooth finish makes this bit ideal for surfacing operations. Also used when good chip clearance is important in material such as gummy wood. Carbide tipped. 1/4" shank.
View Details
$20.99
1/2" COVE ROUTER BIT
For decorative edging. Carbide tipped. 1/4" shank. 1/2" bearing.
View Details
$14.99
1/2" STRAIGHT ROUTER BIT
Designed for roughing operations where high-production feed rates are essential. Optimum chip clearance. Specially designed tip for fast plunge cutting, carbide tipped. 1/4" shank.
View Details
$19.99
1-3/8" BIT CHAMFER
For decorative bevel edging and concealed joints. Carbide tipped. 1/4" shank. 1/2" bearing. 1-3/8" outer diameter, 1/2" cutting length, and 45 deg. angle.
View Details
$11.49
1/2" 60DEG V ROUTER BIT
Excellent for door front grooving, lettering, and sign work. Shear angle cutter geometry for smooth efficient cutting. Carbide tipped. 1/4" shank.
View Details
$11.49
3/8" KEYHOLE ROUTER BIT
For making keyhole slots for picture frames, shelves, mirrors, cabinets, support fixtures, and more. Carbide tipped. 1/4" shank. 3/8" outer diameter, 7/16" cutting length.
View Details
$20.99
5/32" ROMAN OGEE BIT
For decorative edging and period furniture. 1/4" shank. 1/4" bearing.
View Details
$18.99
3/16" EDGEBEAD BIT
For decorative edging and window sash. 1/4" shank. High-speed steel. 1" shank length.
View Details
$11.99
1/2X1 FLUSH TRIM BIT
Carbide tipped. Razor sharp cutting edges are diamond honed for satin smooth cuts. Optimized hook and shear angles for faster chip clearance and quicker feed rates. Precision ball bearings with dust shields for long-lasting performance. Triple tempered shanks for maximum durability.
View Details
$16.49
3/8X9/16 FLUSH BIT
Carbide tipped. Razor sharp cutting edges are diamond honed for satin smooth cuts. Optimized hook and shear angles for faster chip clearance and quicker feed rates. Precision ball bearings with dust shields for long-lasting performance. Triple tempered shanks for maximum durability.
View Details
